计算机帧时间对半实物仿真的影响

半实物仿真试验中,要求计算机帧时间与计算积分步长相一致,但在实际试验中不容易精确地做到。本文分析了这种不一致给半实物仿真试验带来的影响,给出了解决的办法,文章中还给出了一实例来说明。     

微型涡轮发动机控制系统仿真及台架试验

在某微型涡轮发动机控制系统开发过程中，为研究该发动机控制规律，提出一种半物理仿真和台架试验结合的研究方法。设计了包含电子控制器在回路的半物理仿真试验，通过分析原控制逻辑以及起动过程存在的问题，提出对起动控制规律的改进和优化，开展了基于原配电子控制单元和工控机的台架试验，验证了优化后的控制规律，并将其应用于控制器开发。本文提出的方法可避免大量的实物台架试验，缩短控制器的研制周期。     

激波边界层的相互作用对扰动波传播的影响

利用线性稳定性理论和直接数值模拟研究了带有入射斜激波的、来流马赫数Ma=4．5条件下的平板边界层的失稳特性。重点考察了在由于激波边界层相互干扰，平板边界层上形成分离区，又进而产生激波、膨胀波和旋涡等复杂流动现象的流场上游，引入小扰动的TS波后，扰动波传播通过带有这些复杂流动现象的流场时，扰动波的发展变化特点。通过对流场中扰动波（包括基本波和衍生波）演化特征的分析，研究分离和激波等复杂流动现象对平板边界层稳定性的影响特点。数值模拟发现，激波的出现不同于一般的压缩波，在亚声速区与超声速区对扰动波演化的影响是不同的，此外，分离对扰动有稳定作用。     

Gravity wave momentum flux generation close to mid-latitude Andes in mesoscale simulations of late 20th and 21st centuries

Adequate representations of diverse dynamical processes in general circulation models (GCM) are necessary to obtain reliable simulations of the present and the future. The parameterization of orographic gravity wave drag (GWD) is one of the critical components of GCM. It is therefore convenient to evaluate whether standard orographic GWD parameterizations are appropriate. One alternative is to study the generation of gravity waves (GW) with horizontal resolutions that are higher than those used in current GCM simulations. Here we assess the seasonal pattern of topographic GW momentum flux (GWMF) generation for the late 20th and 21st centuries in a downscaling using the Rossby Centre regional atmospheric model under the Intergovernmental Panel on Climate Change A1B emission conditions. We focus on one of the world’s strongest extra-tropical GW zones, the Andes Mountains at mid-latitudes in the Southern Hemisphere. The presence of two GCM sub-grid scale structures locally contributing to GWMF (one positive and one negative) is found to the East of the mountains. For the late 21st century the strength of these structures during the GW high season increases around 23% with respect to the late 20th century, but the GWMF average over GCM grid cell scales remains negative and nearly constant around −0.015 Pa. This constitutes a steady significant contribution during GW high season, which is not related to the GWMF released by individual sporadic strong GW events. This characteristic agrees with the fact that no statistically significant variation in GWMF at source level has been observed in recent GCM simulations of atmospheric change induced by increases in greenhouse gases.     

Streamwise-body-force-model for rapid simulation combining internal and external flow fields

A streamwise-body-force-model (SBFM) is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The val-idation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure perfor-mance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tun-nel test results. Results show that to reach the goal of rapid integrated simulation combining inter-nal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.     

进气道堵盖打开过程数值模拟

为获得整体式固冲发动机转级过程中进气道堵盖(包括入口堵盖与出口堵盖)打开过程的流动形态,建立了进气道二维模型,利用Fluent动网格技术和UDF方法,开展了进气道堵盖打开过程非稳态流场研究。结果表明,在入口堵盖打开前,进气道前端形成强烈的弓形激波;在入口打开、出口未开的过程中,沿进气道轴向各监测点压强呈现周期性变化,振荡频率为100 Hz左右,出口堵盖位置压强振荡幅值为0.53 MPa;在出口打开后,补燃室残余热量形成的压强峰导致进气道在短时间内无法起动,随着背压降低至小于进气道再起动反压,进气道完全起动。     

Photolytic behaviour of methane at Lyman-α and 248 nm: Studies in the frame of a simulation program of Titan’s atmosphere (S.E.T.U.P.)

This paper first describes briefly some of the forefront global simulations of Titan’s atmosphere that have been carried out up to now. In these experiments, an initial gaseous mixture of N₂/CH₄ is submitted to a single energy source and the retrieved gas and/or solid phase(s) is/are analyzed by different techniques.     

Simulation Techniques for Cosmological Simulations

Modern cosmological observations allow us to study in great detail the evolution and history of the large scale structure hierarchy. The fundamental problem of accurate constraints on the cosmological parameters, within a given cosmological model, requires precise modelling of the observed structure. In this paper we briefly review the current most effective techniques of large scale structure simulations, emphasising both their advantages and shortcomings. Starting with basics of the direct N-body simulations appropriate to modelling cold dark matter evolution, we then discuss the direct-sum technique GRAPE, particle-mesh (PM) and hybrid methods, combining the PM and the tree algorithms. Simulations of baryonic matter in the Universe often use hydrodynamic codes based on both particle methods that discretise mass, and grid-based methods. We briefly describe Eulerian grid methods, and also some variants of Lagrangian smoothed particle hydrodynamics (SPH) methods.     

Propagation and interaction of interplanetary transient disturbances. Numerical simulations

We study the heliocentric evolution of ICME-like disturbances and their associated transient forward shocks (TFSs) propagating in the interplanetary (IP) medium comparing the solutions of a hydrodynamic (HD) and magnetohydrodynamic (MHD) models using the ZEUS-3D code [Stone, J.M., Norman, M.L., 1992. Zeus-2d: a radiation magnetohydrodynamics code for astrophysical flows in two space dimensions. i – the hydrodynamic algorithms and tests. Astrophysical Journal Supplement Series 80, 753–790]. The simulations show that when a fast ICME and its associated IP shock propagate in the inner heliosphere they have an initial phase of about quasi-constant propagation speed (small deceleration) followed, after a critical distance (deflection point), by an exponential deceleration. By combining white light coronograph and interplanetary scintillation (IPS) measurements of ICMEs propagating within 1 AU [Manoharan, P.K., 2005. Evolution of coronal mass ejections in the inner heliosphere: a study using white-light and scintillation images. Solar Physics 235 (1–2), 345–368], such a critical distance and deceleration has already been inferred observationally. In addition, we also address the interaction between two ICME-like disturbances: a fast ICME 2 overtaking a previously launched slower ICME 1. After interaction, the leading ICME 1 accelerates and the tracking ICME 2 decelerates and both ICMEs tend to arrive at 1 AU having similar speeds. The 2-D HD and MHD models show similar qualitative results for the evolution and interaction of these disturbances in the IP medium.     

Non-Thermal Processes in Cosmological Simulations

Non-thermal components are key ingredients for understanding clusters of galaxies. In the hierarchical model of structure formation, shocks and large-scale turbulence are unavoidable in the cluster formation processes. Understanding the amplification and evolution of the magnetic field in galaxy clusters is necessary for modelling both the heat transport and the dissipative processes in the hot intra-cluster plasma. The acceleration, transport and interactions of non-thermal energetic particles are essential for modelling the observed emissions. Therefore, the inclusion of the non-thermal components will be mandatory for simulating accurately the global dynamical processes in clusters. In this review, we summarise the results obtained with the simulations of the formation of galaxy clusters which address the issues of shocks, magnetic field, cosmic ray particles and turbulence.